AR# 55726

描述

In the Vivado 2013.1 tool, when I upgrade certain IP cores, a series of warning and error messages similar to the following occur:

7 Series GT Wizard v2.4

upgrade_ip -vlnv xilinx.com:ip:gtwizard:2.5 [get_ips  my_gtwizard]

Removed parameter gtz0_val_reference_clock
Removed parameter gtz1_val_reference_clock
Removed parameter gtz2_val_reference_clock
Removed parameter gtz3_val_reference_clock

WARNING: [IP_Flow 19-2191] Attempt to set value '00000000' on disabled parameter 'gt0_val_clk_cor_seq_2_3' is ignored
WARNING: [IP_Flow 19-2191] Attempt to set value '00000000' on disabled parameter 'gt0_val_clk_cor_seq_2_4' is ignored
ERROR: [IP_Flow 19-503] Validation failed for parameter 'gt_type'. For this device GTX is disabled. So please select other options

ERROR: [IP_Flow 19-3196] Value 'DFE-Auto_(no_sliding_TAP)' is out of the range for parameter 'gt0_val_dfe_mode'. Valid values are - DFE-Auto, DFE-Manual, LPM-Auto.
ERROR: [IP_Flow 19-3235] Customization errors found. Encountered problem restoring previous valid configuration, see errors below.
ERROR: [IP_Flow 19-503] Validation failed for parameter 'gt_type'. For this device GTX is disabled. So please select other options

ERROR: [IP_Flow 19-3196] Value 'left_column' is out of the range for parameter 'gt_column'. Valid values are - right_column.
ERROR: [IP_Flow 19-503] Validation failed for parameter 'gt0_val'. No Active Transceivers!

ERROR: [IP_Flow 19-503] Validation failed for parameter 'gt1_val'. No Active Transceivers!

ERROR: [IP_Flow 19-503] Validation failed for parameter 'gt2_val'. No Active Transceivers!

FIFO 生成器 v10.0

upgrade_ip -vlnv xilinx.com:ip:fifo_generator:10.0 [get_ips afifo]

WARNING: [IP_Flow 19-2191] Attempt to set value '1023' on disabled parameter 'Full_Threshold_Assert_Value_wach' is ignored
...
ERROR: [IP_Flow 19-508] Validation failed for parameter 'Full_Threshold_Assert_Value_wach'. Value '1' is out of the range (6,1023)

解决方案

The upgrade of the core is not being handled properly.

To resolve this issue in the Vivado 2013.1 tool, install the patch at the end of this answer record for the designated OS in conjunction with the specific patch for the IP being upgraded.

• For FIFO Generator 10.0: please also install the patch found at (Xilinx Answer 55612).
• For 7 Series GT Wizard v2.4: please also install the patch found at (Xilinx Answer 55723).

Refer to the readme file for instructions on how and where to install the patch files.

This issue will be resolved and this patch will no longer be required in the Vivado 2013.2 tool.

附件