2. 技术支持
  3. AR# 54528: LogiCORE IP Motion Adaptive Noise Reduction (MANR) - Release Notes and Known Issues for Vivado 2013.1 and newer tool versions

AR# 54528

|

LogiCORE IP Motion Adaptive Noise Reduction (MANR) - Release Notes and Known Issues for Vivado 2013.1 and newer tool versions

描述

This answer record contains the Release Notes and Known Issues for the LogiCORE IP Motion Adaptive Noise Reduction (MANR) core and includes the following:
  • General Information
  • Known and Resolved Issues
  • Revision History

This Release Notes and Known Issues Answer Record is for the core generated in Vivado 2013.1 and newer tool versions.
Please reference XTP025 - IP Release Notes Guide for past known issue logs and ISE support information.

LogiCORE IP Motion Adaptive Noise Reduction (MANR) core IP Page:
http://www.xilinx.com/content/xilinx/en/products/intellectual-property/ef-di-img-ma-noise.html

Note: Not recommended for new designs. The core is removed from IP catalog as of 2014.1. Please contact Xylon, our IP partner, for solutions related to motion adaptive noise reduction.

解决方案

General Information

Supported devices can be found in the following three locations:
For a list of new features and added device support for all versions, see the Change Log file available with the core in Vivado design tools.

Version Table
This table correlates the core version to the first Vivado design tools release version in which it was included.
Core
Version		 Vivado Tools
Version
v6.0 (Rev. 3) 2013.4
v6.0 (Rev. 2) 2013.3
v6.0 (Rev. 1) 2013.2
v6.0 2013.1


General Guidance

The table below provides answer records for general guidance when using the LogiCORE IP Motion Adaptive Noise Reduction (MANR) core.

Answer Record Title
N/A N/A



Known and Resolved Issues

The following table provides known issues for the LogiCORE IP Motion Adaptive Noise Reduction (MANR) core, starting with v6.0, initially released in Vivado 2013.1.

Note: The "Version Found" column lists the version the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.

Answer Record Title Version Found Version Resolved
(Xilinx Answer 57690) Why do I see ghosting artifacts in my image when using the MANR? v6.0 v6.0 (Rev. 3)
(Xilinx Answer 56274) Vivado 2013.2 Multimedia Video and Imaging - How do I properly constrain the Video IP in my design? v6.0 v6.0 (Rev. 2)
(Xilinx Answer 55980) Why do I see write failures on the AXI4-Lite bus, when the AXI4-Stream clock is at a different frequency than the AXI4-Lite interface clock? v6.0 v6.0 (Rev. 1)


Revision History
04/16/2014 - Added v6.0 (Rev. 3) to Version Table, Note: Not recommended for new designs. The core is removed from IP catalog as of 2014.1. Please contact Xylon, our IP partner, for solutions related to motion adaptive noise reduction.
10/23/2013 - Added v6.0 (Rev. 2) to Version Table, (Xilinx Answer 57690) and updated Known and Resolved Issues table for 2013.3.
06/19/2013 - Added v6.0 (Rev. 1) to Version Table, (Xilinx Answer 56274), (Xilinx Answer 55980)
04/03/2013 - Initial release

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
56852 Xilinx Multimedia, Video and Imaging Solution Center - Top Issues N/A N/A

子答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
56274 Vivado 2013.2 Multimedia Video and Imaging - How do I properly constrain the Video IP in my design? N/A N/A
55980 LogiCORE Video Timing Controller v5.01.a - Why do I see write failures on the AXI4-Lite bus, when the AXI4-Stream clock is at a different frequency than the AXI4-Lite interface clock? N/A N/A
57690 LogiCORE IP Motion Adaptive Noise Reduction (MANR) v6.0 - Why do I see ghosting artifacts in my image when using the MANR? N/A N/A
AR# 54528
日期 11/10/2014
状态 Archive
Type 版本说明
Tools
IP
People Also Viewed