AR# 46235

|

AXI Bridge for PCI Express - x8 gen1 and x4 gen2 do not have a DRC to ensure a 128-bit interface

描述

Version Found: 1.02.a
Version Resolved and other Known Issues: see (Xilinx Answer 44969)

The AXI Bridge for PCI Express must use a 128-bit AXI interface when configured as a x8 gen 1 or x4 gen 2.This configuration is only available for 7 series devices.

解决方案

The following parameters must be set to 128:

  • C_S_AXI_DATA_WIDTH - In the GUI, this is called: AXI Slave Port Data Width
  • C_M_AXI_DATA_WIDTH - In the GUI, this is called: AXI Master Port Data Width
The EDK tools will allow a bit file to be generated and issue no error.However, this will not work in hardware.A DRC will be added in a future release of the core.

Revision History

03/05/2012 - Corrected link to version resolved AR.
02/08/2012 - Initial Release

NOTE:The "Version Found" columnlists the version that the problem was firstdiscovered. The problem might also exist in earlier versions, but no specific testing has been performedto verify earlier versions.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
44969 AXI Bridge for PCI Express - Release Notes and Known Issues for All Versions up to ISE 14.7 N/A N/A

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
44969 AXI Bridge for PCI Express - Release Notes and Known Issues for All Versions up to ISE 14.7 N/A N/A
AR# 46235
日期 05/20/2012
状态 Active
Type 已知问题
IP
People Also Viewed