AR# 33127

|

Virtex-6 FPGA Integrated Block Wrapper v1.4 for PCI Express - UCF constraint for sys_clk incorrect for ML605

描述


Known Issue: v1.4, v1.3, v1.2, v1.1 
 
When I generate the Virtex-6 FPGA Integrated Block Wrapper for PCI Express, the created UCF is incorrect when the ML605 is selected on Page 9 of the GUI. Specifically, if I target the XC6VLX240T-FF1156-1 part and select a 100 MHz or 250 MHz Reference Clock on Page 11 of the GUI, the clock buffer and pins for sys_clk are incorrectly placed, as follows: 
 
For 100 MHz: 
 
 #NET "sys_clk_n" LOC = P6; 
 #NET "sys_clk_p" LOC = P5; 
INST "refclk_ibuf" LOC = IBUFDS_GTXE1_X0Y7; 
 
For 250 MHz: 
 #NET "sys_clk_n" LOC = V6; 
 #NET "sys_clk_p" LOC = V5; 
INST "refclk_ibuf" LOC = IBUFDS_GTXE1_X0Y4;

解决方案


The IBUFDS location and pins for the 100 MHz option and the pin placement for the 250 MHz option are not correct. Users of the ML605 should change the UCF as follows: 
 
100 MHz Reference Clock: 
 #NET "sys_clk_p" LOC = P6; 
 #NET "sys_clk_n" LOC = P5; 
INST "refclk_ibuf" LOC = IBUFDS_GTXE1_X0Y6; 
 
250 MHz Reference Clock: 
 #NET "sys_clk_p" LOC = V6; 
 #NET "sys_clk_n" LOC = V5; 
INST "refclk_ibuf" LOC = IBUFDS_GTXE1_X0Y4; 
 
Revision History 
12/08/2009 - Added 250 MHz clocking information 
09/11/2009 - Updated info on pin LOCs P5 and P6 
07/13/2009 - Initial Release  
09/11/2009 - Updated info on pin LOCs P5 and P6

链接问答记录

相关答复记录

AR# 33127
日期 08/26/2013
状态 Active
Type 综合文章
IP
People Also Viewed