2. 技术支持
  3. AR# 29522: LogiCORE RapidIO - Problem running Synplify flow with Serial RapidIO core

AR# 29522

|

LogiCORE RapidIO - Problem running Synplify flow with Serial RapidIO core

描述

When using Synplicity with the Serial RapidIO Core, some modifications are needed. See details for the specific device you are targeting.

解决方案

Virtex-5

- You might receive the following error in the Synplify report:

"@E: CG161 :"S:\myproj\coregen\srio_v4_2_synplicity_v\example_design\gtp_wrapper_tile.v":427:9:427:19|parameter
PCS_COM_CFG cannot be found in module GTP_DUAL."

This error is a result of library files (unisim.v and unisim.vhd) delivered by Synplicity that are missing the PCS_COM_CFG parameter. Using Synplicity v9.0 or later should resolve this issue. Otherwise, see (Xilinx Answer 29248).

- Edit the UCF file as follows:

Change:

NET "rio_de_wrapper/mgt_reset_n" TIG;

To:

NET "rio_de_wrapper/lnk_reset_n" TIG;

Change:

NET "phy_4x_ser_clk/UCLK" TNM_NET = "UCLK";
NET "phy_4x_ser_clk/UCLK2" TNM_NET = "UCLK2";
NET "phy_4x_ser_clk/UCLK_DV4" TNM_NET = "UCLK_DV4";

To:

NET "phy_4x_ser_clk/UCLK_BUF" TNM_NET = "UCLK";
NET "phy_4x_ser_clk/UCLK2_BUF" TNM_NET = "UCLK2";
NET "phy_4x_ser_clk/UCLK_DV4_BUF" TNM_NET = "UCLK_DV4";

- In the same UCF file as above, add the following lines:

INST "rio_de_wrapper/phy_wrapper/rocketio_wrapper/gtp_wrapper/tile0_gtp_wrapper_i/gtp_dual_i" PCS_COM_CFG=28'h1680a0e;
INST "rio_de_wrapper/phy_wrapper/rocketio_wrapper/gtp_wrapper/tile1_gtp_wrapper_i/gtp_dual_i" PCS_COM_CFG=28'h1680a0e;


Virtex-4

- Edit the UCF file as follows:

Change:

NET "rio_de_wrapper/mgt_reset_n" TIG;

To:

NET "rio_de_wrapper/lnk_reset_n" TIG;

- When implementing the design example, you might receive the following MAP error:

"Mapping design into LUTs...
ERROR:MapLib:822 - RAMB16 symbol "user_top/initiator_user/initiator_bram/iram2"
has READ_WIDTH_A set to 18 and READ_WIDTH_B set to 18. This will result in
the disconnection of the following output pins:
DOA16, DOA17, DOA18, DOA19, DOA20, DOA21, DOA22, DOA23, DOA24, DOA25, DOA26,
DOA27, DOA28, DOA29, DOA30, DOA31, DOB16, DOB17, DOB18, DOB19, DOB20, DOB21,
DOB22, DOB23, DOB24, DOB25, DOB26, DOB27, DOB28, DOB29, DOB30, DOB31

These pins drive other logic in the design and will leave it sourceless.
Please change the value of READ_WIDTH_A/B or modify the design source and
"resynthesize."

The synthesis tool might not be mapping the ports properly on the initiator module of the design example. This issue should not affect the functionality of the Serial RapidIO Core.

Virtex-II Pro

No modification is needed for running Synplicity flow for Virtex-II Pro.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
40519 Serial RapidIO v5.6 - Release Notes and Known Issues for ISE Design Suite 13.1 N/A N/A

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
40519 Serial RapidIO v5.6 - Release Notes and Known Issues for ISE Design Suite 13.1 N/A N/A
AR# 29522
日期 09/25/2012
状态 Archive
Type 已知问题
IP
People Also Viewed