AR# 66347

|

UltraScale FPGA Gen3 Integrated Block for PCI Express v4.1 Rev1 (Vivado 2015.4) - ASPM Support Update

描述

Version Found: 4.1 (Rev1)

Version Resolved and other Known Issues: (Xilinx Answer 57945)

The following ASPM support update has been added in the patch attached with this Answer Record.

Gen3 Speed:


No ASPM : Yes
ASPM L0s : No
ASPM L1 : Yes
Simultaneous L0s and L1 : No

Gen1/Gen2 Speed:


No ASPM : Yes
ASPM L0s : Yes
ASPM L1 : Yes
SimultaneousL0s and L1 : No


The above ASPM options are selectable in the 'Power Management' tab with 'Advanced' mode in the core configuration GUI.

_________________________________________________
This article is part of the PCI Express Solution Centre
(Xilinx Answer 34536) Xilinx Solution Center for PCI Express

解决方案

Please follow the instructions below to install the patch:

  • The provided patch is for Vivado 2015.4
  • Unzip the attached zip file to the directory of your choice.
  • Open Vivado 2015.4 and create a new project.
  • Open IP catalog. Right click the core you are using and choose IP Settings.
  • Click Repository Manager and point it to the location where you have unzipped the patch.
  • Click OK and you are now ready to generate the core.
  • If you have previously generated the core, you can choose 'Upgrade IP' on your core.
  • Alternatively, you can use the MYVIVADO environment variable and point this to the location of the patch.

Note: The ASPM update in the patch will be integrated in a future release of the core.

Revision History:

15/1/2016 - Initial Release

附件

文件名 文件大小 File Type
AR66347_Vivado_2015_4_preliminary_rev2.zip 819 KB ZIP
AR# 66347
日期 01/18/2016
状态 Active
Type 已知问题
IP
People Also Viewed