描述
There is a known issue with MIG 7 Series LPDDR2 designs where the PHY_#_BITLANES parameter can be set incorrectly.
This can cause the design to fail during implementation with the following error message:
[Route 35-54] Net: example_top_inst/u_de_lpddr2_b4/u_de_lpddr2_b4_mig/u_memc_ui_top_std/mem_intfc0/ddr_phy_top0/u_ddr_mc_phy_wrapper/u_ddr_mc_phy/ddr_phy_4lanes_0.u_ddr_phy_4lanes/ddr_byte_lane_A.ddr_byte_lane_A/oserdes_clk is not completely routed.
The MIG design has top-level pin out parameters that are specifically assigned values to match the pin out.
If any of the pin out in the XDC has been modified the MIG core must be regenerated so that the rest of the parameters and design files get updated accordingly.
Otherwise, unrouted nets can also occur.