AR# 5685: F1.5i_sp1 -9500XV auto-selection does not work automatically in the current release
AR# 5685
|
F1.5i_sp1 -9500XV auto-selection does not work automatically in the current release
描述
Keywords: 9500XV, auto-selection, F1.5i_SP1, SP1
Urgency: Standard
General Description: When I use the auto-selection for the 9500XV, the 9500XV family is not targeted automatically in the current version.
解决方案
When using the Foundation Schematic flow:
1. Go to File -> Project Type. 2. For the family, select XC9500XL. 3. For the part, select the XC95*XV. 4.Click Implementation -> and select the XC95*XV from the device pull-down menu. (Step four is not automatically selected.)
When using the Foundation HDL flow:
1. Click on the Synthesis button in the flow chart. 2. Select the Target Device family as XC9500XL. 3. Select the Target Device as XC9500XV and click "Run." 4. Go to the Versions tab in the Foundation Project Manager. 5. Right-click on "Ver - optimized." 6. Select "Target new device." 7. Select the XC95*XV family, and click "OK." 8. Right-click on the rev, and select "invoke interactive flow engine." 9. Select the arrow to start the flow engine.