AR# 46747: Spartan-6 FPGA Design Assistant - Using block RAM CORE Generator and FIFO CORE Generator to setup the blocks for use in HDL code
AR# 46747
|
Spartan-6 FPGA Design Assistant - Using block RAM CORE Generator and FIFO CORE Generator to setup the blocks for use in HDL code
描述
ThisAnswer Record provides information on how to setup block RAM or FIFOs with IP generated CORE Generator software.
NOTE: This Answer Record is part of the XilinxSpartan-6 FPGA Solution Center (Xilinx Answer 44744).The XilinxSpartan-6 FPGASolution Center is available to address all questions related toSpartan-6 devices.Whether you are starting a new design withSpartan-6 FPGA or troubleshooting a problem, use theSpartan-6 FPGA Solution Center to guide you to the right information.
解决方案
If you need to directly instantiate a block RAM or FIFO block into your design, the CORE Generator tool can be used. For more information on how to use the block RAM Generator or FIFO Generator IP cores, refer to the corresponding data sheets listed below for each IP core:
Once you generate either of these cores in the CORE Generator tool, the cores include an instantiation template (.veo file for verilog, .vho file for vhdl) that you can use to instantiate the core into your HDL code.