AR# 43060

描述

This patch attached to this Answer Record is required for bitstream creation in ISE Design Suite 13.3 and 13.4 software for the Kintex-7 325T Initial ES devices (XC7K325T CES9937).

解决方案

This patch is required for the Kintex-7 325T Initial ES devices only (XC7K325T CES9937). 

This patch fixes/corrects a small number of memory cell settings for the XC7K325T.

The patch replaces the kintex7.bfd file in the ISE Design Suite installation.

It is recommended to update to ISE 13.4 software, but the ISE 13.3 patch is being provided as well.

• The tactical patch for ISE 13.4 is 43060_kintex7_325t_ise134_patch.zip
• The tactical patch for ISE 13.3 is 43060_kintex7_325t_ise133_patch.zip

Kintex-7 325T Initial ES devices are not supported in the 14.x release of ISE Design Suite. Design targeting these device must use 13.3/4 with the patches linked here.

Important Note: Use this patch only with Kintex-7 325T Initial ES Samples (XC7K325T CES9937). This patch will affect all Kintex-7 devices being targeted; therefore, do not install this patch to an ISE software installation that will target General ES or Production Kintex-7 devices.

Separate ISE installs are recommended for Initial ES and General ES silicon because of this patch.

The MYXILINX variable can also be used, as described in (Xilinx Answer 2493). This patch will not affect Virtex-7 or Artix-7 FPGAs.

Installation/Use:

Install the patch by extracting the contents of the ".zip" archive to the root directory of the XILINX 13.3 ISE software installation, for example, C:\Xilinx\13.3\ISE_DS\ISE\), or your MYXILINX environment variable. 

Select the option that allows the extractor to overwrite all of the existing files and maintain the directory structure predefined in the archive.

For more information on finding the Xilinx installation and using environment variables, see (Xilinx Answer 11630).
For more information on using the MYXILINX environment variable, see (Xilinx Answer 2493).

Note: You might be required to have a system administrator to install the patch if you do not have write permissions to the Xilinx Install directory, or can not use the MYXILINX option.

Please contact Xilinx Technical Support with problems or questions.

附件

链接问答记录

主要问答记录

相关答复记录