2. 技术支持
  3. AR# 3516: M1.4 Timing: Do NOT use the FTP patch M1.3.7 speed files for EX
  4. AR# 35163: MIG 7 Series and Virtex-6 DDR2/DDR3 - Per-Bit Deskew

AR# 35163

|

MIG 7 Series and Virtex-6 DDR2/DDR3 - Per-Bit Deskew

描述

The MIG 7 Series and Virtex-6 DDR2/DDR3 designs do not include per-bit deskew. Becauseper-bit deskewis not included, what design considerations are necessary to follow?

Note: This Answer Record is a part of the Xilinx MIG Solution Center (Xilinx Answer 34243). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.

解决方案

Per-bit deskew algorithms are used to align each bit within a DQS group. Because this is not included, it is extremely important to follow the trace matching requirement for a DQS group:
  • The maximum electrical delay between any DQ and its associated DQS/DQS# should be 5 ps.
For full PCB Layout Guidelines, please see the DDR2/DDR3 SDRAM Memory Solution > Design Guidelines section of UG406for Virtex-6 and UG586 for 7 Series devices.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
51954 MIG 7 Series DDR2/DDR3 - PHY Initialization and Calibration N/A N/A
34740 MIG Virtex-6 DDR2/DDR3 - PHY Initialization and Calibration N/A N/A
AR# 35163
日期 09/26/2012
状态 Active
Type 解决方案中心
器件 More Less
IP
People Also Viewed