Test Pattern Generator LogiCORE IP 产品和软件需求

  • 不支持低功耗器件或 -L part
  • 不支持航天级或 Q part

软件要求表

LogiCORE™ 版本 支持 AXI4 软件支持 支持的器件系列
测试模式生成器 v8.1 AXI4-Stream
AXI4-Lite
Vivado® 2021.1 Versal™
Kintex® UltraScale+™
Virtex® UltraScale+
Zynq® UltraScale+
Kintex UltraScale
Virtex UltraScale
Zynq-7000
Artix®-7
Kintex-7
Virtex-7 / HT / XT
测试模式生成器 v4.00a AXI4-Stream
AXI4-Lite
ISE® 14.4 Zynq-7000
Artix-7
Kintex-7
Virtex-7 / HT / XT

Download the required software from the Xilinx.com Downloads page. For information on New Features, Known Issues, and Patches please refer to the Licensing Solution Center.

* A Hardware Evaluation license for any of the IP cores above will enable you to parameterize, generate and instantiate these cores in your design. You will also be able to perform functional and timing simulation and generate a bitstream that you can use to download and configure your design in hardware.

The IP cores in this table will be fully functional in the programmed device for certain amount of time. After this time, the IP will "time out" (cease to function) and you will need to download and configure the FPGA again.