xclbinutil Utility

The xclbinutil utility can create, modify, and report xclbin content information.

The available command options are shown in the following table.

Table 1. xclbinutil Commands
Option Description
-h [ --help ] Print help messages.
-i [ --input ]<arg> Input file name. Reads xclbin into memory.
-o [ --output ]<arg> Output file name. Writes in memory xclbin image to a file.
--target <arg> Target flow for this image. Valid values: hw, hw_emu, and sw_emu.
----private-key <arg> Private key used in signing the xclbin image.
--ceritifcate <arg> Certificate used in signing and validating the xclbin image.
--digest-algorithm <arg> Digest algorithm. Default: sha512
--validate-signature Validates the signature for the given xclbin archive.
-v [ --verbose ] Display verbose/debug information
-q [ --quiet ] Minimize reporting information.
--migrate-forward Migrate the xclbin archive forward to the new binary format.
--add-section <arg> Section name to add to the xclbin image. Format: <section>:<format>:<file>
--add-replace-section <arg> Replace an existing section or add the section of the xclbin image if it does not exist. Format: <section>:<format>:<file>
--add-merge-section <arg> Add the section if it does not exist, or merge content with an existing section. Format: <section>:<format>:<file>
--remove-section<arg> Section name to remove from the xclbin image.
--dump-section<arg> Section to dump. Format: <section>:<format>:<file>
--replace-section<arg> Section to replace.
--key-value<arg> Key value pairs. Format: [USER|SYS]:<key>:<value>
--remove-key<arg> Removes the given user key from the xclbin archive.
--add-signature<arg> Adds a user defined signature to the given xclbin image.
--remove-signature Removes the signature from the xclbin image.
--get-signature Returns the user defined signature (if set) of the xclbin image.
--info Report accelerator binary content. Including: generation and packaging data, kernel signatures, connectivity, clocks, sections, etc
--list-sections List all possible section names (standalone option).
--version Version of this executable.
--force Forces a file overwrite.

The following are various use examples of the tool.

Reporting xclbin information
xclbinutil --info --input binary_container_1.xclbin
Extracting the bitstream image
xclbinutil --dump-section BITSTREAM:RAW:bitstream.bit --input binary_container_1.xclbin
Extracting the build metadata
xclbinutil --dump-section BUILD_METADATA:HTML:buildMetadata.json --input binary_container_1.xclbin
Removing a section
xclbinutil --remove-section BITSTREAM --input binary_container_1.xclbin --output binary_container_modified.xclbin

For most users, details about the contents and how the xclbin was created is desired. This information can be obtained through the --info option and reports information on the xclbin, hardware platform, clocks, memory configuration, kernel, and how the xclbin was generated.

The output of the xclbinutil command using the --info option is shown below divided into sections.

xclbinutil -i binary_container_1.xclbin --info

xclbin Information


   Generated by:           v++ (2020.1) on Mon Apr 13 20:19:40 MDT 2020
   Version:                2.6.436
   Kernels:                CopyKernel
   Signature:
   Content:                Bitstream
   UUID (xclbin):          d081de98-3fd3-4e9b-bab3-108b42c73101
   UUID (IINTF):           862c7020a250293e32036f19956669e5
   Sections:               DEBUG_IP_LAYOUT, BITSTREAM, MEM_TOPOLOGY, IP_LAYOUT,
                           CONNECTIVITY, CLOCK_FREQ_TOPOLOGY, BUILD_METADATA,
                           EMBEDDED_METADATA, SYSTEM_METADATA, PARTITION_METADATA

Hardware Platform Information

Vendor:                 xilinx
Board:                  u200
Name:                   xdma
Version:                201830.1
Generated Version:      Vivado 2018.3 (SW Build: 2388429)
Created:                Wed Nov 14 20:06:10 2018
FPGA Device:            xcu200
Board Vendor:           xilinx.com
Board Name:             xilinx.com:au200:1.0
Board Part:             xilinx.com:au200:part0:1.0
Platform VBNV:          xilinx_u200_xdma_201830_1
Static UUID:            00194bb3-707b-49c4-911e-a66899000b6b
Feature ROM TimeStamp:  1542252769

Clocks

Reports the maximum kernel clock frequencies available. Both the clock names and clock indexes are provided. The clock indexes are identical to those reported in platforminfo Utility.

Name:      DATA_CLK
Index:     0
Type:      DATA
Frequency: 300 MHz

Name:      KERNEL_CLK
Index:     1
Type:      KERNEL
Frequency: 500 MHz

Memory Configuration

Name:         bank0
Index:        0
Type:         MEM_DDR4
Base Address: 0x0
Address Size: 0x400000000
Bank Used:    No

Name:         bank1
Index:        1
Type:         MEM_DDR4
Base Address: 0x400000000
Address Size: 0x400000000
Bank Used:    Yes

Name:         bank2
Index:        2
Type:         MEM_DDR4
Base Address: 0x800000000
Address Size: 0x400000000
Bank Used:    No

Name:         bank3
Index:        3
Type:         MEM_DDR4
Base Address: 0xc00000000
Address Size: 0x400000000
Bank Used:    No

Name:         PLRAM[0]
Index:        4
Type:         MEM_DDR4
Base Address: 0x1000000000
Address Size: 0x20000
Bank Used:    No

Name:         PLRAM[1]
Index:        5
Type:         MEM_DRAM
Base Address: 0x1000020000
Address Size: 0x20000
Bank Used:    No

Name:         PLRAM[2]
Index:        6
Type:         MEM_DRAM
Base Address: 0x1000040000
Address Size: 0x20000
Bank Used:    No

Kernel Information

For each kernel in the xclbin, the function definition, ports, and instance information is reported.

The following is an example of the reported function definition.

Definition
----------
   Signature: krnl_vadd (int* a, int* b, int* c, 
			 int const  n_elements)

The following is an example of the reported ports.

Ports
-----
   Port:          M_AXI_GMEM
   Mode:          master
   Range (bytes): 0xFFFFFFFF
   Data Width:    32 bits
   Port Type:     addressable

   Port:          M_AXI_GMEM1
   Mode:          master
   Range (bytes): 0xFFFFFFFF
   Data Width:    32 bits
   Port Type:     addressable

   Port:          S_AXI_CONTROL
   Mode:          slave
   Range (bytes): 0x1000
   Data Width:    32 bits
   Port Type:     addressable

The following is an example of the reported instance(s) of the kernel.


Instance:        krnl_vadd_1
   Base Address: 0x0

   Argument:          a
   Register Offset:   0x10
   Port:              M_AXI_GMEM
   Memory:            bank1 (MEM_DDR4)

   Argument:          b
   Register Offset:   0x1C
   Port:              M_AXI_GMEM
   Memory:            bank1 (MEM_DDR4)

   Argument:          c
   Register Offset:   0x28
   Port:              M_AXI_GMEM1
   Memory:            bank1 (MEM_DDR4)

   Argument:          n_elements
   Register Offset:   0x34
   Port:              S_AXI_CONTROL
   Memory:            <not applicable>

Tool Generation Information

The utility also reports the v++ command line used to generate the xclbin. The Command Line section gives the actual v++ command line used, while the Options section displays each option used in the command line, but in a more readable format with one option per line.

Generated By
------------
Command:       v++
Version:       2018.3 - Tue Nov 20 19:42:42 MST 2018 (SW BUILD: 2394611)
Command Line:  v++ -t hw_emu --platform /opt/xilinx/platforms/xilinx_u200_xdma_201830_1/xilinx_
			   u200_xdma_201830_1.xpfm --save-temps -l --connectivity.nk krnl_vadd:1
			   -g --messageDb binary_container_1.mdb 
			   --temp_dir binary_container_1 
			   --report_dir binary_container_1/reports --log_dir binary_container_1/logs 
                  --remote_ip_cache /wrk/tutorials/ip_cache 
                  -obinary_container_1.xclbin binary_container_1/krnl_vadd.o 
Options:       -t hw_emu
               --platform /opt/xilinx/platforms/xilinx_u200_xdma_201830_1/xilinx_u200_xdma_201830_1.xpfm
               --save-temps
               -l
               --connectivity.nk krnl_vadd:1
               -g
               --messageDb binary_container_1.mdb
               --temp_dir binary_container_1
               --report_dir binary_container_1/reports
               --log_dir binary_container_1/logs
               --remote_ip_cache /wrk/tutorials/ip_cache
			-obinary_container_1.xclbin binary_container_1/krnl_vadd.o 
==============================================================================
User Added Key Value Pairs
--------------------------
   <empty>
==============================================================================