svf config
Configure options for SVF file
Syntax
svf config [options]
Configure and generate SVF file.
Options
| Option | Description |
|---|---|
| -scan-chain <list of idcode-irlength pairs> | List of idcode-irlength pairs. This can be obtained from xsdb command - jtag targets |
| -device-index <index> | This is used to select device in the jtag scan chain. |
| -cpu-index <processor core> | Specify the cpu-index to generate the SVF file. For A53#0 - A53#3 on ZynqMP, use cpu-index 0 -3 For R5#0 - R5#1 on ZynqMP, use cpu-index 4 -5 For A9#0 - A9#1 on Zynq, use cpu-index 0 -1 If multiple MicroBlaze processors are connected to MDM, select the specific MicroBlaze index for execution. |
| -out <filename> | Output SVF file. |
| -delay <tcks> | Delay in ticks between AP writes. |
| -linkdap | Generate SVF for linking DAP to the jtag chain for ZynqMP Silicon versions 2.0 and above. |
| -bscan <user port> | This is used to specify user bscan port to which MDM is connected. |
| -mb-chunksize <size in bytes> | This used to specify the chunk size in bytes for each transaction while downloading. Supported only for Microblaze processors. |
Returns
Nothing
Example(s)
svf config -scan-chain {0x14738093 12 0x5ba00477 4} -device-index 1 -cpu-index 0 -out "test.svf"This creates a SVF file with name test.svf for core A53#0
svf config -scan-chain {0x14738093 12 0x5ba00477 4} -device-index 0 -bscan pmu -cpu-index 0 -out "test.svf"This creates a SVF file with name test.svf for PMU MB
svf config -scan-chain {0x23651093 6} -device-index 0 -cpu-index 0 -bscan user1 -out "test.svf"This creates a SVF file with name test.svf for MB connected to MDM on bscan USER1